Quantitative analysis of imazamox herbicide in environmental water samples by capillary electrophoresis electrospray ionization mass spectrometry

Capillary electrophoresis-mass spectrometry (CE-MS) with an electrospray ionization interface was applied for the quantitative analysis of imazamox pesticide in well water, potable water, and pond water. The detector response for imazamox was determined to be linear over the concentration range of 50-1 ng/ml. The limits of quantitation and detection of the method were determined to be 200 and 20 ng/l for imazamox compound in each type of water sample, respectively. The total sample preparation and CE-MS analysis time was under 2 h.     

Hydrothermal synthesis of potassium molybdenum oxide bronzes: structure-inheriting solid-state route to blue bronze and dissolution/deposition route to red bronze

The hydrothermal syntheses of the alkali metal molybdenum bronzes from starting solids (H_xMoO₃) with structural affinities to the desired products were investigated. Single-phase potassium blue and red bronzes were prepared by the hydrothermal treatments at around 430 K, and characterized by powder X-ray diffraction, IR spectroscopy, and SEM. The formation processes of these two bronzes during the hydrothermal treatments were found to differ. The blue bronze was formed by a structure-inheriting solid-state route from H_xMoO₃ with x<0.3, whereas the red bronze was formed for x>0.3 through a solution dissolution/deposition route via the formation of MoO₃+MoO₂.     

A NOVEL EOR POLYMER (Ⅱ)——INVESTIGATION ON IN-SITU GELATION OF SMRF SYSTEM IN BEREA CORE

In-situ gelation of aqueous sulfomethylated resorcinol formaldehyde (SMRF) system inBerea core has been investigated. Two sets of displacement experiments were conducted with thissystem (containing 5% NaCl, 0. 036% CaCl_2. 2H_2O). The brine permeabilities of the coreswere reduced significantly from about 600 to 0.1 md. The in-situ gelation in Berea core occurreda little bit earlier than gelation anticipated from bulk test in the experiments. The gel time waseasier to control at initial pH between 6 and 8. During injection of SMRF system, the apparentviscosity was less than 1 mPa·s at 41℃.     

On the number of faces of centrally-symmetric simplicial polytopes

I. Bárány and L. Lovász [Acta Math. Acad. Sci. Hung.40, 323–329 (1982)] showed that ad-dimensional centrally-symmetric simplicial polytopeP has at least 2 ^d facets, and conjectured a lower bound for the numberf _i ofi-dimensional faces ofP in terms ofd and the numberf ₀ =2n of vertices. Define integers A. Björner conjectured (unpublished) that (which generalizes the result of Bárány-Lovász sincef _d–1 = h _i ), and more strongly that , which is easily seen to imply the conjecture of Bárány-Lovász. In this paper the conjectures of Björner are proved.Partially supported by NSF grant MCS-8104855. The research was performed when the author was a Sherman Fairchild Distinguished Scholar at Caltech.     

Dual quartz crystal microbalance compensation using a submerged reference crystal. Effect of surface roughness and liquid properties

Absolute resonant frequency measurements were made on gold-coated AT-cut quartz crystals with one face in contact with a series of liquids. The effect of surface roughness and liquid properties (viscosity and density) was analyzed in terms of a “trapped liquid” model. In this model, liquid present in surface imperfections is viewed as rigidly coupled mass. In some of the literature this density-dependent, but not viscosity-dependent, term is viewed as being additive to the hydrodynamic shift seen for a smooth surface. Data obtained using 1 μm and 5 μm surface finish crystals are inconsistent with the predictions of the trapped liquid model. This suggests hydrodynamic coupling between liquid internal and external to the crevices. Despite the lack of a theoretical model for the liquid motion, it is possible to compensate for frequency variations resulting from changing liquid properties and for roughness effects by making direct measurements of the resonant frequency difference between two crystals exposed to the same solution. This novel procedure works to the extent that the two crystals have similar surface topographies. Compensation is excellent for 1 μm finish crystals and good for 5 μm finish crystals.     

Solid-phase synthesis of imidazo[4,5-b]pyridin-2-ones and related urea derivatives by cyclative cleavage of a carbamate linkage

A solid-phase synthesis of substituted cyclic urea derivatives as potential heterocyclic library scaffolds is described. 2-Amino-3-nitropyridine is attached to Wang resin via a carbamate linkage. Reduction of the nitro group was achieved with SnCl(2).2H(2)O. Reductive alkylation with a range of substituted benzaldehydes followed by cyclative cleavage afforded a small library of 3-substituted imidazo[4,5-b]pyridine-2-ones in 33-45% yield and 59-88% purity. Subsequently, this methodology was applied to the synthesis of 3-substituted imidazo[4,5-f]quinolin-2-ones.     

De novo structural prediction of transition metal complexes: application to technetium

De novo structural prediction of transition metal complexes is investigated. Technetium complexes are chosen given their importance in medical imaging and nuclear waste remediation and for the chemical diversity they display. A new conformational searching algorithm (LIGB) for transition metals is described that allows one to search for different conformational and geometric isomers within a single simulation. In the preponderance of cases, both conformational searching techniques (LIGB and high-temperature molecular dynamics/simulated annealing) provide comparable results, while LIGB is superior for macrocyclic complexes. A genetic algorithm-optimized PM3(tm) parametrization for Tc is compared with the standard implementation and found to yield a significant improvement in predictive ability for the most prevalent Tc structural motifs. The utility of a coupled molecular mechanics-semiempirical quantum mechanics protocol is demonstrated for very rapid, efficient, and effective de novo prediction of transition metal complex geometries.     

A novel synthesis of substituted 4H-pyrazolo[3,4-d]pyrimidin-4-ones

A novel synthesis of 4H-pyrazolo-[3,4-d]pyrimidin-4-ones is described. This approach utilizes an in situ generated iminochloride as a key precursor for amidine formation, with subsequent base-catalyzed ring closure. This method represents a mild and efficient entry into this ring system which is amenable to diversification of the core template.